Magnesium Oxide vs Magnesium Hydroxide: Differences and Uses

Technical Articles
Magnesium hydroxide powder
Technical ArticleUpdated 20 Nov 2026

Magnesium oxide (MgO) is 60.3% magnesium by weight and magnesium hydroxide (Mg(OH)₂) 41.7%. MgO gives the most magnesium per kilogram; Mg(OH)₂ is the usual choice for oral suspensions such as milk of magnesia.

Side by Side

ItemMagnesium OxideMagnesium Hydroxide
FormulaMgOMg(OH)₂
CAS1309-48-41309-42-8
Molecular Weight40.3058.32
Magnesium Content60.3%41.7%
Food Additive NumberE 530E 528
Solubility in WaterPractically insolublePractically insoluble
Assay in Our Specification96.0–100.5% MgO98.0–100.5% Mg(OH)₂
Loss on Ignition≤ 10.0%30.0–32.5%
Our GradesFood grade, USP gradeUSP grade, also meets FCC

How They Relate

Heating magnesium hydroxide drives off water and leaves magnesium oxide. Pure Mg(OH)₂ loses about 30.9% of its weight this way, which is why its loss on ignition is specified at 30.0–32.5%. Published reviews put the start of this decomposition at about 350 °C.

The reaction also runs the other way. 21 CFR 184.1428 lists two ways to make food-use magnesium hydroxide: adding sodium hydroxide to a solution of a soluble magnesium salt, or hydrating reactive grades of magnesium oxide. 21 CFR 184.1431 describes magnesium oxide as made by heating magnesium hydroxide or carbonate. In the seawater and brine route, magnesium hydroxide is precipitated with lime or sodium hydroxide, filtered and then calcined to the oxide.

Because reactive magnesium oxide hydrates, it slowly takes up moisture and carbon dioxide from the air. Keep bags sealed until use.

Acid-Neutralizing Capacity

Both compounds react with hydrochloric acid to form magnesium chloride and water:

  • MgO + 2 HCl → MgCl₂ + H₂O
  • Mg(OH)₂ + 2 HCl → MgCl₂ + 2 H₂O

Each mole of either compound neutralizes two moles of acid. Per gram, that works out to about 49.6 mEq for pure MgO and about 34.3 mEq for pure Mg(OH)₂, so magnesium oxide neutralizes about 45% more acid per gram in theory. These are stoichiometric figures. How fast a powder reacts depends on its particle size and surface area, and the acid-neutralizing capacity of a finished product is measured by test, not calculated.

In the United States, 21 CFR 331.11 lists magnesium oxide, magnesium hydroxide and magnesium carbonate among the permitted active ingredients for OTC antacids, and 21 CFR 331.10 requires the finished product to contain at least 5 mEq of acid-neutralizing capacity, measured by the USP method.

Regulatory Status

ItemMagnesium OxideMagnesium Hydroxide
US Food (21 CFR)184.1431, GRAS184.1428, GRAS
JECFA Functional UseAnticaking agentAlkali, color adjunct
US OTC Antacid (21 CFR 331.11)ListedListed

The US functions differ. 21 CFR 184.1431 covers magnesium oxide as an anticaking and free-flow agent, firming agent, lubricant and release agent, nutrient supplement and pH control agent. 21 CFR 184.1428 covers magnesium hydroxide as a nutrient supplement, pH control agent and processing aid. Both are used at levels within current good manufacturing practice.

Uses

  • Magnesium oxide: magnesium source in supplements and fortified foods; antacid and laxative (USP grade); anticaking agent and acidity regulator (E 530).
  • Magnesium hydroxide: antacid in tablets, chewables and oral suspensions (milk of magnesia is a suspension of magnesium hydroxide in water); osmotic laxative, usually as a suspension; magnesium supplement; acidity regulator in food (E 528).

Which One to Specify

Choose magnesium oxide when you need the most magnesium per kilogram, for example in tablets, capsules and fortified foods, where it keeps the dose small. Choose magnesium hydroxide for liquid antacids and oral suspensions. To compare doses across compounds, use the Magnesium Content Calculator.

When you write the specification, state the compound, the grade and the standard (for example USP 41 or FCC), and the particle size if it matters for suspension or tableting. Both of our products have a shelf life of 24 months in the original sealed bag and are packed in 10, 15 or 25 kg bags.

Product pages: Food Grade Magnesium Oxide, USP Magnesium Oxide and USP Grade Magnesium Hydroxide Powder.

Get a Quote

Tell us the product, grade, quantity and destination port.

We use your details only to reply to this inquiry. Privacy Policy

FAQ

Common Questions

Can't find your question here? Send it to us and our sales team will answer.

Ask a Question

Magnesium oxide. It is 60.3% magnesium by weight, against 41.7% for magnesium hydroxide.

In theory, magnesium oxide: about 49.6 mEq per gram against about 34.3 mEq for magnesium hydroxide. The capacity of a finished antacid is measured by test.

Magnesium hydroxide. Milk of magnesia is a suspension of magnesium hydroxide in water.

Reactive grades do. 21 CFR 184.1428 lists hydration of reactive magnesium oxide as one way to make magnesium hydroxide. This is also why magnesium oxide should be kept sealed and dry.

Yes. It is E 528 in the EU and GRAS in the US under 21 CFR 184.1428. Our USP grade magnesium hydroxide powder also meets FCC.